|
|
|
|
|
|
Forklift Carriage and Load Protector 8" x 18"
|
|
|
Protect loads and forklift hosing from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.
|
|
|
|
|
|
|
|
|
|
Cast Iron Heavy Duty Pipe Grabs - 450 Load Limit - Pipe O.D. 3.5" to 4"
|
|
|
Designed for lifting pipe (cast iron or steel) with overhead lifting device. Automatic operation allows for easy use by anyone. Loads must be centered and guided during lifting operations. Heavy-duty steel construction with painted finish.
|
|
|
|
|
|
|
|
|
|
|
Cast Iron Heavy Duty Pipe Grabs - 600 Load Limit - Pipe O.D. 4.5" to 4.8"
|
|
|
Designed for lifting pipe (cast iron or steel) with overhead lifting device. Automatic operation allows for easy use by anyone. Loads must be centered and guided during lifting operations. Heavy-duty steel construction with painted finish.
|
|
|
|
|
|
|
|
|
|
Heavy Duty Beam Hooks - 2,000 LBS Capacity - Max Beam Width 6"
|
|
|
Designed for lifting I-beams with overhead lifting device. The heavier the load the stronger the grip. Includes lifting ring for easy use with overhead hoist. Loads need to be centered and guided during lifting operation. Manufactured to ASME B30.20 standards.
|
|
|
|
|
|
|
|
|
|
Pallet Dumper/Retainer
|
|
|
PAL-D-R - Pallet Dumper
|
|
|
|
|
|
|
|
|
|
Overhead Coil Hooks - 1.000 LBS Capacity - 6" Max Coil Width - Min Coil Radial 13" - Min I.D 9"
|
|
|
Designed for lifting heavy coils with overhead lifting device. Easy position coils from horizontal to vertical position. Steel construction with painted finish.
|
|
|
|
|
|
|
|
|
|
Die Lifting Tongs - 2,000 LBS Capacity - Max Opening Width20"
|
|
|
Designed for lifting dies with overhead lifting devices. Includes lifting ring for easy use with overhead hoist. Manufactured to ASME B30.20 standards.
|
|
|
|
|
|
|
|
|
|
Fork Lift Mounted Trash Can Dumper - 1000 LBS Capacity
|
|
|
Save time and reduce work-related injuries caused by lifting and dumping heavy waste containers. This innovative product will allow a fork truck driver to lift and dump refuse containers weighing up to 1,000 lbs. without ever leaving the seat of the fork truck! Secure dumper to fork truck with safety chain and run cable to driver's seat. Align trash can with dumper and lock into place. Once locked in place, transport trash can to refuse container, align, and pull chain to dump refuse container contents. Only for use with 64 gallon trash can, model TH-64, or approved equal. Fork pockets are 2¼" high by 7¼" wide usable. Steel construction for years of dependable use. Trash Can Not Included. See Item # TH-64-GY
Fork Pockets 2-1/4" x 7-1/4" Usable
|
|
|
|
